SR2101 Grid On Photovoltaic Educational System Vocational Training Equipment Renewable Training Equipment
I.Product overview
This system can simulate solar energy generation process, enable students to understand on photovoltaic generation system directly, and be familiar with grid connection training equipment composition and run principle.
II.Technical data
Solar energy generation set: consist of whole aluminum structure, photovoltaic adjustable panel(can adjust angle), with universal wheels under the bottom of aluminum frame, so it’s movable, and with lockers to fix the position. External dimension: 1500×800× 1000mm(Length× Width× Height) Single solar cell parameter is as follows:
Max work power(Pmax) 250W Best work power(Vmp) 34.4V Best work current(Imp) 7.26A Open circuit voltage(Voc) 43.2V Short circuit current(Isc) 8.33A Short circuit temperature coefficient (0.065±0.015)%/℃ Open voltage temperature coefficient -(80±10)mV/℃ Peak value work power temperature coefficient -(0.5±0.05)%/℃ NOCT 47±2℃ Work temperature -40℃ to 85℃ System maximum voltage 1000V DC
Output work power tolerance ±3% Inverter parameter:
Anti-water connection grid inverter series
230V/50Hz
Recommended solar panel
300W/Vmp>34V/Voc<50V
Photovoltaic maximum DC input current
15A
Maximum AC output work power
260Watt
Maximum DC open circuit input voltage
50VDC
DC input voltage range
22~50VDC
Max output work power factor
0.99
DC input reverse voltage protection
FUSE
AC output voltage range
80V125V160V/180V230V262V
AC frequency range
455054/556064Hz
Output total harmonic distortion
THDIAC<5%
AC phase difference
<0.5%
Islet protection mode
VAC;fAC
Output short circuit protection mode
Current limit
Display
LED method: work power indicate, voltage indicate, AC frequency indicate, over voltage indicate
III. System introduction
This system consist of three independent photovoltaic generation system connect in parallel, each generation system parallel value can be monitored by PC, to real time display electricity generation value, generation time, max peak value etc. 1.Solar panel use aluminum holder to fix, with universal wheels under the holder, it’s flexible and can be locked by locker, solar panel angle can be adjusted. 2. Grid connection inverter is fixed on solar panel holder, through cable to connect, convert solar panel electricity to work frequency 220V AC electricity, and connect to market electricity. 3.Through communication module, can monitor electricity data in each inverter, and display in PC in real time, it’s easy for management, and support Ethernet monitor.