Mechatronics Training Equipment

HYDRAULIC BENCH educational training equipment Mechatronics Trainer Equipment

Item No.: ZMH1112
ZMH1112 HYDRAULIC BENCH educational training equipment Mechatronics Trainer Equipment
INQUIRY
Description

ZMH1112 HYDRAULIC BENCH educational training equipment Mechatronics Trainer Equipment
Set of didactic equipment for the study of basic hydraulics, electro-hydraulics, proportional hydraulics and hydraulic regulation.
- Double-sided mobile workstation allows the assembly and operation of individual components without the use of tools (components equipped with quick assembly system)
The workstation must be equipped with:
-     1x Mobile cart on wheels with dimensions ±10:
•         length 1540mm,
.         height 1760mm
.         minimum depth 770mm
-     1x Double-sided plate for easy fixing of dimensioned components
•         length1080 mm minimum
.         depth 680 mm minimum
- 1x double-sided front panel for inserting electrical components
- 2x Fixed cabinet with at least 3 drawers
- 2x Rubber oil drip tray
- 1x Cable guide
- 1x Hose holder
Set of equipment for the study of hydraulics and electro-hydraulics
 

- 1x 4/2-way valve with manual operation and spring return
- 1x Manually operated 4/3-way valve, Y-center
- 1x 4/3 manually operated dispenser, closed center
- 1x Check valve
- 1x Pilot operated check valve
- 1x Direct operated pressure relief valve
- 1x bi-directional flow restrictor
- 1x one-way flow restrictor
- 2x Double acting cylinders piston diameter 25mm, rod diameter 16mm maximum and a stroke of 200mm minimum
- 1x Mounting kit for cylinder
- 1x Hydraulic motor with torque drainage 60 Nm
- 1x Load weight of 15 kg maximum with mounting adapted to the cylinder delivered assembled in a grid for safety purposes
- 1x hydraulic membrane accumulator with locking diaphragm. 
- 3x Pressure gauge with quick coupling and glycerine bath pressure range 0- 100 bar
- 2x T-distributor with quick coupling
- 1x Shut-off valve
- 2x Module of 3 electrical relays (contacts 3NO-3NC for each relay, coil 24 VDC)
- 1x Module of 3 electric push buttons
- 1x Module of 2 timer relays (2NO-2NC contacts)
- 2x 4/2 monostable electrically driven 4/2 directional control valve (24 VDC coil with excitation indicator light)
- 1x 4/3 spool valve with closed center, electrically controlled (24 VDC coil with excitation indicator light)
- 1x Electronic pressure switch
- 2x Electronic proximity switch
Set of accessories
- 10x Hose with quick couplings, 600 mm
- 6x Hose with quick couplings, 1000 mm
- 4x Hose with quick couplings, 1500 mm
- Set of 4 mm safety laboratory cables (red and blue color) consisting of at least 80 cables
- Power supply unit for mounting frame 220V AC - 24VDC / 10A maximum short-circuit protected.
 

Hydraulic power unit
- Control unit with integrated circuit breaker and emergency stop
- Single-phase alternating current motor
- Rated voltage: 230 V/50Hz
- Rated power: 1 kW minimum
- Coupled to 2 double pumps (gear or vane pump)
- Flow rate of each pump: 3.5 l/min minimum
- Pressure 50 bar minimum
- Tank capacity 40 Liter minimum with return channel filter.