SS250603A-G-4 Impact of a Jet School Educational Equipment Vocational Trainer Workbench Lab Fluid Mechanics Equipment

DESCRIPTION Water is discharged vertically through a nozzle to strike a target carried on a stem, which extends through the cover. The dead weight of the moving parts is counterbalanced by a compression spring. The vertical force exerted on the target plate is measured by adding the weights supplied to the weight pan. The apparatus consists of a cylindrical clear acrylic fabrication with provision for leveling. Water is fed through a nozzle and discharged vertically to strike a target carried on a stem, which extends through the cover. A weight carrier is mounted on the upper end of the stem. The dead weight of the moving parts is counterbalanced by a compression spring. The vertical force exerted on the target plate is measured by adding the weights supplied to the weight pan until the mark on the weight pan corresponds with the level gauge. A total of eight targets are provided. Principle of linear momentum To investigate the reaction forces produced by the change in momentum of a fluid flow Measurement of the forces produced by a jet impinging on solid surfaces which produce different degrees of flow deflection TECHNICAL SPECIFICATIONS Nozzle diameter: 8mm Distance between nozzle & target plate: 40mm Diameter of target plate: 36mm Target plates:  180° hemispherical target  120° target (cone)  Flat target  30° target  60° target  Cup 135°  Oblique 30/150°  Oblique 45/135° Requires Hydraulics Bench 
Service Length: 0.325m Width: 0.20m Height: 0.50m