ZE3608Industrial PLC Unit Didactic Education Equipment For School Lab Electrical Laboratory Equipment 1. Product Overview
1.1 Overview
This training device is Siemens S7-1200CPU module. Through relevant experiments, you can be familiar with the basic use and programming methods of S7-1200 PLC, the use of programming software, etc. Cultivate the corresponding knowledge and skills of students, suitable for teaching and skills training and assessment of related majors in vocational schools, vocational schools, secondary vocational schools and technical schools.
1.2 Features
(1) All the input and output terminals of the PLC module are led out to the panel through the transfer terminal, and connected with the K2 test line.
(2) The PLC module selects Siemens PLC, provides digital input 8 in 14 output, analog input 6 in 2 output, supports RS232 and RS485 communication.
(3) The module is equipped with a DC 0-30V voltmeter.
(4) Equipped with 2 sets of analog DC0-10 output.
2. Performance parameters
(1) Input power: single-phase three-wire system 220V ± 10% 50Hz
(2) Dimensions: 297mm × 230mm × 80mm
(3) Total capacity: <500VA
(4) Weight: <100kg
(5) Working conditions: ambient temperature -10 ℃ ～ + 40 ℃ relative humidity ＜ 85% (25 ℃)
3. Product composition 1: Module power switch 2: Module digital input 3: Module analog input 4: DC 24V output 5: DC0-30V voltmeter 6: Voltage analog signal DC 0-10V output (2 groups) 7: RS232 communication module 8: RS485 communication module 9: module relay output 10: Siemens plc 11: analog output
3.1 Module power switch
The power switch can also indicate the power status.
3.2 Module digital input
The module contains 8 digital inputs, which can be connected to signal input components such as buttons
3.3 Module analog input
The module contains 6 analog input points, which can be connected to voltage analog signals or current analog signals.
3.4 Module DC24V output
The module contains a set of DC24V output, which can provide DC24V power for the sensor.
3.5 Module DC0-30V voltmeter
The module contains a DC0-30V voltmeter, which can measure DC0-30V voltage.
3.6 Voltage analog signal DC 0-10V output
This module contains 2 sets of DC 0-10V DC voltage analog signals, which can be used as PLC DC voltage analog input signals.
