HM 150.13A Methods of Flow Measurement Didactic Equipment Fluids Engineering Training Equipment
1. Equipment introduction
Through HM 150.13A, students become familiar with various methods of measuring flow in piping systems and apply them in practice. The experimental setup contains different measuring instruments to determine the flow rate. These instruments are designed with transparent housings to allow visual visualization of their operation and functionality. This method includes, for example, rotameters, venturi nozzles or orifice flow meters and measuring nozzles. Use six tube manometers to determine the pressure distribution in a venturi nozzle or orifice flow meter and measure the nozzle. The total pressure is measured by a pitot tube. The experimental setup can be placed easily and securely on the work surface of the HM 150A basic module. The HM 150A supplies water and measures the flow rate. Alternatively, the experimental setup can be operated from the laboratory water supply. The HM 150.13A flow measurement method unit includes three different flow meters allowing experimental studies of the following relationships: 1. Comparison of different flow meters 2. Research on the relationship between flow and pressure in flow measurement 3. Determination of flow coefficient 4. Calibration of flow meter
2. Technical parameters
Weight: approx. 40 kg Dimensions: 1100 mm* 672 mm* 900 mm Water pressure gauge plate: 6 tubes 390 mm WC Rotameter: Maximum 1600L/h Pipe part: inner diameter 17 mm
