ST513 Single-stage piston compressor Teaching equipment Hydraulic Bench Equipment
1. Description
The generation of compressed air for industrial and commercial purposes in areas where compressed air is used as a source of energy requires what are known as compressed air generation plants. A central part of these systems is the compressor. Of the air by means of mechanical energy. Compressed air generation plants are used to power machines in the mining industry, for pneumatic control systems in assembly facilities or as tyre inflation units at petrol stations.
The single-stage piston compressor in ST513 and the drive unit HM 365 together form a complete compressed air generation system.
The drive is HM 365 powers the compressor by means of a V-belt. The air is sucked into the intake vessel, where it settles before it is compressed inside the compressor. To sSTa steady flow operating mode, the compressed air can be discharged over a blow-off valve with a silencer. A pressure switch with a solenoid valve for limiting the pressure And a safety valve complete the system.
A measuring nozzle at the intake vessel is used to determine the suction volumetric flow rate. Sensors record the pressures and temperatures in front of and behind the compressor. The pressure is also displayed on the manometers in the tanks.
2. Technical details
Specification
Investigation of a driven machine for compressed air generation
Single-stage piston compressor with one cylinder
Drive and speed adjustment via HM 365
Intake vessel with withdrawn nozzle for determination of the suction volumetric flow rate
Intake vessel and pressure vessel, both with pressure sensor and additional manometer
Safety valve and pressure switch with solenoid valve for limiting the pressure
Blow-off valve with silencer for setting a steady flow operating mode
Pressure and temperature sensors in front of and behind the compressor
Digital display for air flow rate, temperatures, pressures, differential pressures and compressor speed
Technical data
Compressor, 1 cylinder, single-stage
Power consumption: 750W
Nominal speed: 980min-1
Positive operating pressure: 8bar
Max. pressure: 10bar
Intake capacity: 150L/min at 8bar
Borehole: 65mm
Stroke: 46mm
Safety valve: 10bar
Pressure vessel
16bar
Volume: 20L
Intake vessel: 20L
Measuring ranges
Temperature: 1x 0...200°C / 1x 0...100°C
Pressure: 0...16bar / -1...1bar
Flow rate: 0...150L/min
Speed: 0...1000min-1
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase
120V, 60Hz, 1 phase
UL/CSA optional
Required for operation
PC with Windows recommended
