SS260819AS01 Solar Power Training System Vocational Trainer Workbench Educational Laboratory Bench Renewable Energy TrainerDetail Technical Specification:
Type: Integrated, modular renewable-energy training system for hands-on study of solar PV, wind and hydrogen fuel-cell power, with theory verification and simulation
Training Capabilities (minimum): Integrated, modular renewable-energy training system for hands-on study of solar PV, wind and hydrogen fuel-cell power, with theory verification and simulation
Off-grid, grid-tied, hybrid and smart-grid power control; V/I/load experiments per grid; I-V and P-V characteristics by irradiance, incidence angle, distance and temperature; series/parallel PV connection; battery charge/discharge and MPPT control; off-grid and grid-tied inverter operation; wind-power and hydrogen-electrolysis/ fuel-cell experiments; PV-wind, PV-hydrogen, wind-hydrogen and PV-wind-hydrogen hybrids; RS-485 data measurement and monitoring
Worktable: Aluminium-profile modular worktable, approx. 1,600(W) × 800(D) x 820(H)mm; noise-reduction casters (4): 2x AC 220V outlets, module storage drawers
Module Rack & Slots: Aluminium-profile slot-board frame (25mm interval) with easy attach/detach of experimental modules; double-stack modular rack (approx. 1,600 x 750mm)
PV Module Capacity: PV cell modules [A] and [B]: minimum 50 Wp each, 12V nominal (two modules, to allow series and parallel connection experiments); Voc approx. 18-22V (extra-low voltage for trainee safety); outdoor-rated weatherproof modules (at least IP65 junction box) on an adjustable-tilt mounting frame installed outdoors, cabled to the indoor trainer with sufficient DC cable length (minimum 30 m).
Safety: ELCB, fused inlets, insulated ground terminals, overheat/short- circuit/overload and reverse-polarity protection on relevant modules
Accessories: AC power cord; insulated connection cables; module power cables; RS-485 communication cable; user and experimental manuals (1 set)
