whatsapp: 0086-15153112822
Electrical Training Equipment

Switch Gear Protection Trainer, Educational Equipment

Item No.: ZE3231
ZE3231 Switch Gear Protection Trainer Didactic Equipment Teaching Equipment for college, university, vocational training schools, Polytechnics, engineering development cen
INQUIRY
Description

ZE3231 Switch Gear Protection Trainer Didactic Equipment Teaching Equipment
Voltage / over voltage protection relay   Excitation voltage: 180-240 V
Input voltage (Under/over range): 100-300V Adjustable Current handling capacity: 0-5 A Frequency: 45-60 Hz
All terminals are on front plate. Use for educational experiment purpose.   
Under current / over current protection relay with auto re- clCsureExcitation voltage: 180-240 V Under current / over current range: 0-10 A Adjustable Voltage handling capacity: 150-300 V Frequency: 45-60 Hz
All terminals are on front plate. Use for educational experiment purpose.   
Under frequency / over • frequency protection relay       Excitation voltage: 180-240 V Under frequency / over frequency range: 35-60 Hz Adjustable Voltage handling capacity: 150-300 V
Current handling capacity: 0-5 A
All terminals are on front plate. Use for educational experiment purpose.   
Auto Re-closer : 1-0, 230 V, 2 A, 50 Hz, Reclosing Duration : 5-180 Seconds adjustable, Reclose times : 2-10 Adjustable.
All terminals are on front plate. Use for educational experiment purpose :  
3- O, 415 V, 3 A, 50 Hz
All terminals are on front plate. Use for educational experiment purpose
Excitation voltage: 180-240 V. 1-0, 230 V, Temperature 10°C-100°C Main Bus 3- cp, 415 V, 10 A, 50 Hz.
All terminals are on front plate. Use for educational
experiment purpose.    
3-<|), 415V, 5A All terminals are on front plate.
Use for educational experiment purpose.
All terminals are on front plate. Use for educational experiment purpose
3- O, 415 volt, 5 Amp, 50 Hz
All terminals are on front plate. Use for educational
experiment purpose.    

190W, 1380 rpm.400V, 0.7A, 30, 50 Hz, Copper conductor, SS shaft, Aluminum yoke,
All terminals are on front plate. Use for educational experiment purpose.
DC
Motor/Generator      Motor Rating: minimum 200V DC, 1.5A, 200W, 1500 rpm Shunt field rheostat (for speed control)
Generator Rating: minimum 150V DC, 0.75A, Shunt field rheostat (for voltage control) Prime mover speed 1500rpm. Copper conductor, SS shaft,
All terminals are on front plate. Use for educational experiment purpose.   
Synchronou Motor/ Generator  
DC Excitation in rotor circuit winding type: Lap winding, single layer.
Motor Rating: 3 Phase, 415V, 0.5A, 190W, 50 Hz, 1500 rpm or above, Generator Rating: 3 Phase, 415Volt, 172VA, 0.25A, 50Hz, 1500 rpm or above. Copper conductor, SS shaft, Aluminum yoke,

All terminals are on front plate. Use for educational experiment purpose.   
Power supply. AC 3 Phase, 4 Wire, Fixed 415V, 230 V 10A, Variable 0- 415V, 4A, DC Fixed: 240V, 10mp or above, Variable 0- 240V, 5A or above All terminals are on front plate, Use for educational experiment purpose.    
Mobile work station Wheel mounted, one double size, four full size, three half size module cabinet, One door cabinet with lock, Auto release & sliding tray, Dimension: H x W x D= minimum 60 inch x 36 inch x 21 inch
Supply and installation of Laboratory equipment for Mechanical Technology, Electrical Technology & Automatic Bottle Filling, Labelingn Capping Machine
Use for educational experiment purpose.   
Cable length minimum 01 yds. With both & Staking plugs 25 pcs or above.