TB-220726-V-206 Wind Power Plants Training System Didactic Equipment Renewable Training Equipment
The System Should cover the following Training Objective: Investigation of conversion of kinetic energy into electrical energy Investigation of power adjustment by means of speed adjustment Investigation of power adjustment by means of rotor blade adjustment Observation of behavior in the case of oblique flow recording of characteristic diagrams Acquiring the power coefficient as a function of the tip-speed ratio and rotor blade adjustment angle Acquiring the power coefficient as a function of the tip-speed ratio and yaw angle Comparison of different rotor blade shapes
Minimum Technical Specifications Required (like or better than): Wind power plant ─3x adjustable rotor blades ─Electrical power 6W ─Wind velocity: 10m/s ─Rated speed: 2850rpm ─Design tip-speed ratio: 4.5 ─Rotor blade adjustment: -5 to 35° Variable speed generator system with rated voltage/current: 10V, 2A Power regulation by means of rotor blade adjustment Adjustable speed axial fan with maximum volumetric flow rate: 6800m3/h, 1 kW to generate an air flow Wind tunnel with diameter of: 390mm Wind velocity, rotor speed and yaw angle are measured by sensors Wind velocity sensor with measuring range: 1 to 15m/s Rotor speed with measuring range: 0 to 3970 rpm Yaw angle with measuring range: -40° to 40° Current measuring range: -2 to +2 A Set of instructional material Should include LAN/WLAN interface to enable connection of countless number of pcs with for observation and evaluation of the experiments The system is placed on a rigid trolley with four castor wheels Control, operation and data acquisition software ─Capability of remote learning ─Multimedia online course on fundamentals of wind power USB interface PC Core i7, DVD+/-RW, 8GB RAM, 1TB Hard Disk Drive, Optical Mouse, Multimedia Keyboard, Monitor (21") LED