H12 Variable slope channel Fluid Mechanics Laboratory Vocational Training Equipment
The hydraulic channel EH1000 is a channel with variable slope, and its transparent side walls allow to visualize the flow of the vein.
Educational goals:
Evidence of different flows: uniform, permanent, gradually or abruptly varied.
Identification of different flow: torrential, critical, fluvial
Distribution of speeds in a channel
Chezy, Bazin, Manning-Stricklel Formulas
Flows above different types of thresholds: thin, thick rim, triangular weir.
Flow measurements in a critical section
Torrential - fluvial: the hydraulic jump
Studies of eddy curves
Flow through a Venturi and / or Parshall Flume
Influence of roughness on a flow
Technical description:
The design and design of the EH1000 gives the properties of a uniform channel, ie the rigorous respect of the oven. The length-to-width ratio of the EH1000 classifies it as long. The water circulates in closed circuit.
The EH1000 channel is made of Plexiglas.
Of uniform roughness, it is assembled by a special assembly which ensures parallel walls and a constant section.
The perfect rigidity of the channel is ensured by a Plexiglas box beam. At its endstream, it is based on a manual screw jack that allows a fine adjustment of positive or negative slopes. The water is pumped from the main tank and fed into the canal itself, via a "duckbill" valve, located upstream of the test vein.
The valve "duckbill" makes turbulence, turbulence, vortices and excessive disturbances.
The flow is regulated by a multi-turn manual valve and is measured by an electromagnetic needle flow meter.
The end of the canal ends with a spilling ceiling with a guillotine valve from which the water falls back into the main tank. Due to its configuration, this spillway is still unclogged and provides an essential hydraulic break at the exit of the channel.
The bench consists of:
1 kW stainless steel centrifugal pump
Water tank
Magnetic float needle type flow meter.
2 vernier gauges. 1 pitot tube
1 thin-walled weir with ventilated ply, 2 thick weirs, 1 venturi, 1 vertical guillotine valve, 2 bridge piers, 1 triangular weir and 1 rough bed
optionsprice didn’t include, if you need, must pay extra price for it)
Parshall Canal, siphon, radial sector valve, inclined sill, weir and ski jump, weir and weir.
