whatsapp: 0086-15153112822
Heat Transfer Lab Equipment

Mechanical Heat pump Vocational Education Equipment For School Lab Thermal Transfer Demonstrational Equipment

Item No.: SR6128
SR6128 Mechanical Heat pump Vocational Education Equipment For School Lab Thermal Transfer Demonstrational Equipment
INQUIRY
Description

SR6128 Mechanical Heat pump Vocational Education Equipment For School Lab Thermal Transfer Demonstrational Equipment
Specification
investigation of a heat pump with a water circuit as load
refrigeration circuit with compressor, evaporator with fan, thermostatic expansion valve and coaxial coil heat exchanger as condenser
hot water circuit with pump, tank and condenser as heater
additional cooling via pipe coil in the hot water tank and external cooling water
record and display of all relevant measured values
refrigerant mass flow rate calculated in the software from recorded measured values
software for data acquisition via USB under Windows 7, 8.1, 10
refrigerant R513A, GWP: 631
Technical data
Compressor
refrigeration capacity: 372W at 7,2/55°C
power consumption: 205W at at 7,2/55°C
Coaxial coil heat exchanger (condenser)
refrigerant content: 0,55L
water content: 0,3L
Finned tube evaporator


transfer area: approx. 0,175m2
Pump
max. flow rate: 1,9m3/h
max. head: 1,4m
Hot water tank volume: approx. 4,5L
Refrigerant: R513A
GWP: 631
filling volume: 1kg
CO2-equivalent: 0,6t
Measuring ranges
pressure: 2x -1…15bar
temperature: 4x 0…100°C, 2x -100…100°C
power: 0…6000W
flow rate: 0…108L/h (water)
flow rate: 10…160L/h (cooling water)
flow rate: 0…17kg/h (refrigerant)
230V, 50Hz, 1 phase; 230V, 60Hz, 1 phase
120V, 60Hz, 1 phase
UL/CSA opional
Dimensions and weight
LxWxH: 1630x800x1900mm
Weight: approx. 195kg


Electricity meter: Watt-hour type recording
electrical input to the compressor using a digital wattmeter    
designed to allow students to gain a common understanding and assessment of performance and
characteristics of a heat pump operating on a steam compression cycle and with an electric drive
compressor, and is suitable for all levels of the course, from professional education to students.
Atmospheric air is of poor quality
Work is introduced as electrical energy
into a hermetically sealed compressor
Panel: High quality ABS.
Compressor: fully sealed single cylinder
reciprocating type. Engine displacement about 8.85 cm³ revolutions
Condenser: water refrigerant
Fluid receiver: with valves. Contains all refrigerant charge if required.
Evaporator: air to refrigerant
Digital thermometer: resolution 0.1 ° C, with switch on select from six thermocouples
Flow meters x 2: type of variable area - indicate
R134a and H2O costs.
Gauges x 2: to indicate the pressure of R134a to the evaporator and condenser.
Safety Features: - High Pressure Capacitor Switch
and compressor thermal switch. - Residual current switch. - Combined bipolar trunk
circuit breaker and overload disconnected